•
Installation and assembly shall be carried out by skilled and trained electricians only.
•
Do not connect or disconnect a multifunction counter while it is in contact with a live current. Always dis-
connect the main power supply before connecting or disconnecting the multifunction counter.
•
Make sure that live terminals are properly protected against inadvertent contact.
•
To ensure proper protection of terminals against hand contact, make sure that the live conductors are
properly connected to the terminals.
•
The rules and regulations set forth by the local electricity providers have to be observed.
•
Do not establish any connections with non-allocated (NC) terminals.
•
Multifunction counters may only be operated when properly installed.
Betriebsanweisungen_772_080909 engl_überarbeitet.indd 2
Safety
13
0
06.07.2010 10:31:38