Hengstler Tico 772 Instruction Manual page 41

VAC switching power supply 2 transistors
Betriebsanweisungen_772_080909 engl_überarbeitet.indd 41
3
The plug has to be disconnected
from the counter before the cables
Setup and
are fastened by means of screws or screw-
type terminals.
Do not connect the encoder to a
direct current line voltage without
protective circuit for EMC. For cable
lenths > 30 m a protective circuit is
always required!
When programming the input level to
TTL an additional protective circuit is
required.
We recommend installation in a
metal, grounded panel.
Operation
06.07.2010 10:31:41