Programming The (User) Times - Hengstler Tico 772 Instruction Manual

3
Setup and
Operation
+
press press press press
+ set to 01.0000 Set prescaler
3.10 Programming the user times
For programming the signal time for monostable (timed) output signals, 9 fixed signal times between 0.02 s
and 10 s are available. In addition, three different signal times between 0,01s and 599,99s can be set by the
user. The outputs are deactivated if the setting is 0,00 s.
Betriebsanweisungen_772_080909 engl_überarbeitet.indd 63