Hengstler Tico 772 Instruction Manual page 60

Operation
If no key is pressed for more than 16 seconds in the programming mode, the counter will automatically return
to the display mode. In this case, however, no entries will be saved except the last value saved with the E-key.
Set the preset value to 0 by pressing Up and Down keys simultaneously.
Programming mode
Betriebsanweisungen_772_080909 engl_überarbeitet.indd 60
3
Setup and
Select a position:
(starts flashing)
press
+
Save and return to
Set position:
press
+
06.07.2010 10:31:46
display mode
press
Zero in