Hengstler Tico 772 Instruction Manual page 252

Set function
Display and Preset Range
Warning signal
Signal times
Relay Output
for P 1 and P 2
Transistor Output
for P 1 and P 2
Application Output
Betriebsanweisungen_772_080909 engl_überarbeitet.indd 252
10
Technical Data
automatic reset after reaching Preset 2,
(No pulse losses at max. counter frequency due to automatic reset function).
via application input (programmable) and programmable Power-On Reset
Setting to Preset 0 (independent of reset)
- 999 999 up to + 999 999
Display flashes when preset 0, 1 or 2 are active
0,01 s to 599,99 s or bistable (latched) programming; tolerance + 10ms; active On
or
Off
Change-over contact max. 250 VAC / 30 VDC / 5 A
Change-over contact min. 5 VAC / 5 VDC / 10 mA
delay < 10 ms
PNP-output 12 - 30 VDC max. 50 mA at DC-supply
12 - 24 VDC max. 30 mA at AC-supply (24/115/230 VAC)
12 - 24 VDC, max 50 mA at AC-supply with switching power supply
PNP-output 12 - 30 VDC max. 20 mA at DC supply
12 - 24 VDC max. 20 mA at AC supply (24/115/230 VAC)
06.07.2010 10:32:28