Hengstler signo 723.1 Supplement To Operating Instructions

Supplement to the
Operation Manual
signo 723.1
signo 727.1
RS485 / RS232 Protocol Hengstler TP3
Ordering information
Interface- Power-supply
option
RS 485 12..24
RS 485 115..230 VAC
RS 232 12..24 VDC
RS 232 115..230 VAC
* This ordering code characterizes the interface protocol option TP3.
** An RTC is required when connecting one or more counters to an RS 485 bus.
*** 723Print with only Write-function and baudrate 4800 Baud. (See also 2 723 085)
Interface parameters
Two interface parameters have been added to
Parameter Display
Baud Rate
'F14'
Bus Address 'F19'
* Factory set, compare F30
. " . '
Please set and
according to the values of your network configuration. The settings for data, parity and
stop bits cannot be changed (see technical data on next page).
$UWLFOH 1R   
Variable Preset Counter
Position Indicator
Ordering code
signo 723*
VDC 0 723 160M3
0 723 161M3
0 723 150M3
0 723 151M3
service level 3:
Alternatives Meaning
1.2
1200 baud
2400 baud
2.4
4800 baud
4.8 *
0 Interface deactivated
1 physical address 1
...
...
physical address 31
31
This description is a supplement to the manual
% ! '!
(for signo 723.1) and
signo 727.1).
It contains the feature description of the interface
options for the counters. It also contains hints
required for the installation and connection of a
counter to an RS 485 bus or to RS 232.
Ordering code Ordering code
signo 727*
0 727 160M3 0 723 169
0 727 161M3 0 723 169
0 727 150M3
0 727 151M3
% % !!
(for
Ordering code
RTC**
signo 723Print***
0 723 150M1
0 723 151M1
5HY