Hengstler Tico 772 Instruction Manual page 217

9 Batch Counter
9.1 Batch
(Supplementing the general description in Chapter 4)
Function:
Counter mode
of
operatio
n:
Betriebsanweisungen_772_080909 engl_überarbeitet.indd 217
9
Batch Counter
130
Counter Description
Preset 2 is the main Preset setting.
Preset 1 is the Batch Preset or, respectively, the preset value of the 2nd totalizer.
In the batch operation the batch counter counts how often the main Preset is
activated. Example of an application: during length cutting operations, for
example, both the lengths (main preset) and number (batch preset) can be
monitored. In the Batch mode of operation, only positive entries are possible for
P1; negative entries will be stored as positive values.
The following modes of operation can be adjusted for the counter:
Unidirectional counting, adding or subtracting;
Unidirectional counting with directional input;
Difference counting, summation and phase discrimination
(quad) with single, double or quadruple evaluation.
06.07.2010 10:32:21