Programming The Timer Function Codes - Hengstler Tico 772 Instruction Manual

7.3 Signal
The output signals of the timer can be derived from the pulse counter (see 5.3) or, respectively, batch counter
(see 9.2) functions.
7.4 Programming the
Programming mode
+
Keep pressed and
simultaneously turn
Voltage On
Alternative display of
function codes
Betriebsanweisungen_772_080909 engl_überarbeitet.indd 151
7
Diagrams -
Timer
Change function Save and change to
setting
press
The function codes are displayed as text in row 1. By
+
pressing both keys simultaneously you can change to
the numerical display (F 0 to F 35). After pressing
these keys once again the number of the selectable
options will be displayed in addition. This setting will
be stored.
Timer
Output
Function
mode next function
press
06.07.2010 10:32:07
signals
Codes
Return to display
press