Programming The Counter Function Codes - Hengstler Signo 721.2 User Manual

5 Describtion of the counter

5.4 Programming the Counter Function Codes

Programming Mode:
+
Keep pressed and simulta-
neously turn Voltage On
Alternative display of the
function codes
Change Function
Setting:
press
+
128
Change
to next function:
press
The function codes are displayed as text in row 1.
By pressing both keys simultaneously you can change to
the numerical display (F 0 to F 35). After pressing these
keys once again the number of the selectable options will
be displayed in addition. This setting will be stored.
Return to
Display Mode and save the
set function values:
press