Hengstler Tico 772 Instruction Manual page 84

counter
Prescaler
Out
put
PSC
-out:
Application
cou
nter
inp
ut
ad
d /
sub
Betriebsanweisungen_772_080909 engl_überarbeitet.indd 84
5
Pulse
The prescaler output is an application output.
With each increase of the counter reading the number of output pulses corresponds to
the respective number of increments.
The pulse length of the prescaler output corresponds to a frequency of 500 Hz.
When using the prescaler output the max. count frequency is:
F max = 500 / PSC.
So it is possible that the maximum input frequency can not be reached.
The application input may be assigned to the Count Up or Count Down function.
This is a counter input, which is available in addition to the counter mode adjusted with
F1.
06.07.2010 10:31:51