Rockwell Automation VICPAS PanelView Plus Compact 400 User Manual page 67

Publication 2711PC-UM001A-EN-P - March 2009
2. Press the Memory Allocation button to view or adjust the:
• amount of allocated storage or program memory.
• amount of storage or program memory in use.
3. Press the Up or Down button to increase or decrease the
allocation of storage or program memory.
Each button press changes the allocation by a value of four. If
you change the allocation for one type of memory, the other is
updated accordingly.
These settings are not retained after a power cycle. The
IMPORTANT
settings return to the defaults.
4. Press OK to return to previous screen.
5. Press OK to return to terminal settings.
Configuring the Terminal Chapter 4
67