Accessing The Multipass C20 Unit Settings; To Access The Volume Control Settings (Calling Volume, Keypad Volume, Alarm Volume, Line Monitor Vol) - Canon MultiPASS C20 User Manual

Accessing the MultiPASS C20 Unit Settings

The following section describes how to access some of the settings listed
on pages 2-64 to 2-66.
To Access the VOLUME CONTROL Settings (CALLING
VOLUME, KEYPAD VOLUME, ALARM VOLUME, LINE
MONITOR VOL)
1. Press FUNCTION.
FUNCTION
2. Use < < or > > to select USER SETTINGS.
1 2
Ex:
3. Press START/COPY.
4. Use < < or > > to select VOLUME CONTROL.
1 2
Ex:
5. Press START/COPY.
Ex:
6. Use < < or > > to select the setting you want to set or change.
1 2
Ex:
Select CALLING VOLUME, KEYPAD VOLUME, ALARM
VOLUME, or LINE MONITOR VOL.
7. Press START/COPY.
Ex:
The current setting is displayed.
Chapter 2
FUNCTION
USER SETTINGS
DATE & TIME
VOLUME CONTROL
CALLING VOLUME
KEYPAD VOLUME
VOL MID
Setting Up Your MultiPASS C20
2-67