Redialling
Manual Redialling
To redial the last number dialled with the numeric buttons, press the
REDIAL/PAUSE button.
To cancel manual redialling, simply press the STOP button.
Automatic Redialling With Memory Sending
With memory sending, you can set the MultiPASS L60 to automatically
dial the fax number again if the receiving fax machine does not answer,
if the line is busy, or if an error occurs during sending. You can also
control how many times the MultiPASS L60 will redial the number,
how long it will wait between dialling attempts, and how much of the
fax the MultiPASS L60 will resend if an error occurs. You can set these
options directly from the MultiPASS L60 operation panel, as described
on page 6-28. You can also set these options from the MultiPASS
Desktop Manager. See the MultiPASS Desktop Manager User's Guide
for details.
When automatic redialling is in use, the MultiPASS L60 alternately
displays AUTO REDIAL and the transaction number while it is waiting
to redial.
When it begins redialling, it alternately displays CALLING, the
transaction number (TX/RX NO.), and the fax number you dialled.
If you used one-touch or coded speed dialling to dial the number,
the name registered under that button or code will also be
displayed.
6-26
Sending Faxes
AUTO REDIAL
TX/RX NO.
0013
CALLING
TX/RX NO.
0013
7390208
Chapter 6