Redialling
Manual Redialling
If you are sending a fax manually (using the handset), you can redial by
pressing the
that was dialled with the numeric buttons. (This also starts redialling
regardless of whether automatic redialling is enabled.)
To cancel manual redialling, simply press the
Automatic Redialling With Memory Sending
With memory sending, you can set the MultiPASS C50 to automatically
dial the fax number again if the receiving fax machine does not answer,
if the line is busy, or if an error occurs during sending. You can also
control how many times the MultiPASS C50 will redial the number, how
long it will wait between dialling attempts, and how much of the fax the
MultiPASS C50 will resend if an error occurs. For instructions, see the
MultiPASS Desktop Manager User's Guide.
When automatic redialling is in use, the MultiPASS C50 alternately
displays AUTO REDIAL and the transaction number while it is waiting
to redial:
Ex:
When it begins redialling, the LCD display continuously shows the
following:
During dialling:
Ex:
Chapter 4
(REDIAL)/PAUSE button. This redials the last number
AUTO REDIAL
TX/RX NO.
0002
DIALING
(Fax number you dialled)
503 555 1776
(STOP) button.
4-15
Sending Faxes