General Settings - ICP DAS USA tDS-718i-D User Manual

Tiny Serial-to-Ethernet Device Server

5.3.2 General Settings

The General Settings provides functions allowing items such as the Alias Name, System Timeout
value, UART Watchdog value, Auto-logout value, Debug Message and CGI Configuration to be
configured.
The following is an overview of the parameters contained in the General Settings section:
Item
Network
Ethernet Speed
HTTP Port
Copyright © 2020 ICP DAS CO., Ltd. All Rights Reserved.
This parameter is used to set the Ethernet speed. The default
value is Auto (Auto = 10/100 Mbps Auto-negotiation).
This parameter is used to assign specific a HTTP port of tDS-700/
DS-2200. The tDS-700/DS-2200 needs to be restarted when the
HTTP port is changed. You need manually type the new HTTP port
in the address bar of the browser. The default is 80.
For example: if the HTTP port is set to 81, then enter the "IP
address:HTTP port" (10.0.8.123:81).
Description Default
Auto
80
-58 -