ICP DAS USA tDS-718i-D User Manual page 88

Tiny Serial-to-Ethernet Device Server
Step 4: Testing the Pair-connection (TCP Client Mode) Functions
1. Install TcpIpEcho.exe (TCP/IP Test Server program) on your PC.
The location of the download addresses are shown below:
http://www.brothersoft.com/tcp-ip-test-server-27898.html
2. Run the TCPIPEcho.exe program.
3. Click on "Socket"  "Listen".
4. Type the IP address and port number of the TCP Server (PC#2) in the "Server IP" and "Port
Number" field (e.g., "10.0.8.21" and "500").
5. Click the "Echo Messages Back To Client" check box.
6. After clicking the "OK" button, the server will begin listening on the specific IP/Port.
③
Figure 6-14
Copyright © 2020 ICP DAS CO., Ltd. All Rights Reserved.
④
⑤
⑥
Figure 6-13
-88 -