ICP DAS USA tDS-718i-D User Manual page 85

Tiny Serial-to-Ethernet Device Server
Follow the procedure described below:
Step 1: Connecting to a network, a PC and a Power Supply
1. Confirm that the tDS-700/DS-2200 module is functioning correctly. Refer to
Started for tDS-700
2. Connect both the tDS-700/DS-2200, TCP server (PC #2) and hyper terminal (PC #1) to the same
sub network or the same Ethernet Switch. For detailed RS-232/RS-422/485 wiring information,
refer to Section 2.6 "Wiring Notes for RS-232/485/422
The wiring diagram is as follows:
Figure 6-9
Copyright © 2020 ICP DAS CO., Ltd. All Rights Reserved.
series", Chapter 4 "Getting Started for DS-2200 series"
Chapter 3 "Getting
for more details.
Interfaces".
-85 -