ICP DAS USA tDS-718i-D User Manual page 39

Tiny Serial-to-Ethernet Device Server
3. Click the "Port1" tab to display the Port1 Settings page.
4. Set interface mode for the "Interface" drop down options. (For the tDS-718i-D module only,
other tDS-700 module please skit this step)
your device.
5. Select the appropriate Baud Rate and Data Format (e.g., 115200 and 8N1) from the relevant
drop down options.
6. Click "Submit" to save your settings.
Copyright © 2020 ICP DAS CO., Ltd. All Rights Reserved.

Note: The Baud Rate and Data Format settings depends on your device.
Note: The interface settings depends on wiring method of



-39 -