Testing Your Tds-700 - ICP DAS USA tDS-718i-D User Manual

Tiny Serial-to-Ethernet Device Server

3.6 Testing Your tDS-700

1. Back to VxComm Utility, Right click Port 1 and then choose the "Open COM Port" item.
2. Check that the configuration of the COM Port is correct and then click the "Open COM" button.
3. Type a string (e.g., $01M) in the "send" field
4. Click the "Hex/Text" option in the "Display" section.
5. Click the "Send" button to send the message.
6. If a response is received, it will be displayed in the received field.
If the test is successful, then your COM port program should now be able to work with this
Virtual COM Port.
Copyright © 2020 ICP DAS CO., Ltd. All Rights Reserved.

Right Click

-40 -