ICP DAS USA tDS-718i-D User Manual page 57

Tiny Serial-to-Ethernet Device Server
Manual Configuration
When using manual configuration, the network settings should be assigned in the following
manner:
Step 1: Select the "Static IP" option from the "Address Type" drop-down menu.
Step 2: Enter the relevant details in the respective network settings fields.
Step 3: Click the "Update Settings" button to complete the configuration.



Dynamic Configuration
Dynamic configuration is very easy to perform. If a DHCP server is connected to you network, a
network address can be dynamically configured by using the following procedure:
Step 1: Select the "DHCP" option from the "Address Type" drop-down menu.
Step 2: Click the "Update Settings" button to complete the configuration.


Copyright © 2020 ICP DAS CO., Ltd. All Rights Reserved. -57 -