ICP DAS USA tDS-718i-D User Manual page 82

Tiny Serial-to-Ethernet Device Server
Step 4: Configuring the Pair-connection (Server Mode) on the Web
Server for tDS-700#2
1. Enter the configuration page for the tDS-700 #2 web server.
2. Click the "Port1" link to enter the settings page of the tDS-700 #2.
3. Set the Baud Rate to "115200" and the Data Format to "8, None, 1".
 Refer to Figures 6-3 to 6-5 for illustrations of how to perform the above steps.
4. Select "Server" from the "Application Mode (Server Mode)" drop down options and then click
the "Submit" button to complete the configuration.
Step 5: Testing the Pair-connection Functions
1. Lauch the Test Program.
The following example use Test2COM.exe to perform self-test.
The Test2COM.exe program can be obtained from the ICP DAS FTP site or the ICP DAS web site. The
location of the download addresses are shown below:
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/multiport/utility/
ftp://ftp.icpdas.com/pub/cd/iocard/pci/napdos/multiport/utility/
Copyright © 2020 ICP DAS CO., Ltd. All Rights Reserved.
Figure 6-6
-82 -