ICP DAS USA tDS-718i-D User Manual page 83

Tiny Serial-to-Ethernet Device Server
2. Double-click the Test2COM.exe program and type the relevant configuration as follows:
1. Double Click Test2COM.exe
2. Type COM1\COM2
3. Check Data Bits: 8
4. Check Parity: None
5. Check Stop Bits: 1
6. Uncheck
Note
The Baud Rate and data format depend on the serial port settings for the web configuration above.
Figure 6-8
Copyright © 2020 ICP DAS CO., Ltd. All Rights Reserved.
7. Check Baud Rates: 115200
8. Loop: 10
9. Click "Start Test"
Figure 6-7
10. Test Results: "Failed Test:0"
-83 -