Filter Page; Accessible Ip (Filter Is Disabled When All Zero) - ICP DAS USA tDS-718i-D User Manual

Tiny Serial-to-Ethernet Device Server

5.5 Filter Page

5.5.1 Accessible IP (filter is disabled when all zero)

The Accessible IP Settings section is used to query or edit the IP Filter List. The IP Filter List restricts
the access of packets based on the IP header. If one or more IP address are saved to the IP Filter
table, only clients whose IP is specified in the IP Filter List can access the tDS-700/DS-2200.
The following is an overview of the parameters contained in the Filter Settings (white list) section:
Item
Add "IP" To The List
Add Range "IP"& Mask "IP"
Delete IP# "Number"
Delete All
Save Configuration (finish)
Submit
Copyright © 2020 ICP DAS CO., Ltd. All Rights Reserved.
Add an IP address to the IP Filter List.
Add an IP address range to the IP Filter List.
Delete a specific IP# address from the IP Filter List. (Number: 0 ~ 4)
Delete all items from the IP Filter List.
Save a new IP Filter List to the Flash memory.
Click this button to save the revised settings to the tDS-700/DS-2200.
Description
-66 -