ICP DAS USA tDS-718i-D User Manual page 95

Tiny Serial-to-Ethernet Device Server
Step 3 Double-click the name of the module to open the Configure Server (UDP) dialog box, and
modify the basic settings as necessary, e.g., the IP, Mask and Gateway addresses, and then click the
"OK" button to save the new settings.
Step 5 Log in to the web configuration pages for the tDS-700/DS-2200 module, using the default
web password, "admin".
Copyright © 2020 ICP DAS CO., Ltd. All Rights Reserved.
Step 4 Reset the Init/Run switch on the tDS-700/DS-2200
module to the "Run" position and reboot the device.
-95 -