Configuring The Virtual Com Ports - ICP DAS USA tDS-718i-D User Manual

Tiny Serial-to-Ethernet Device Server
4. Enter the network settings information, including the IP, Mask and Gateway addresses, and
then click "OK" button. The new settings for the DS-2200 will take effect within 2 seconds. If you
don't know the correct network configuration information, contact your Network Administrator to
obtain the details.
Factory Default Settings of DS-2200 Series Module:
IP Address
Subnet Mask
Gateway

4.4 Configuring the Virtual COM Ports

1. Wait 2 seconds and then click the "Search Servers" button again to ensure that the DS-2200
is working correctly with the new configuration.
2. Click the name of DS-2200 to select it.

Copyright © 2020 ICP DAS CO., Ltd. All Rights Reserved.

192.168.255.1
255.255.0.0
192.168.0.1

-46 -