Setup Of Equipment; Set Up And Connect Unit - Weinmann SOMNOsmart 2 Description And Instructions For Use

3. Setup of Equipment

3.1 Set up and connect unit

Important!
W A N D
IN D C -A C
IN V E R
D C -A C
O U T
14
Setup of Equipment
EN
1. Set up the unit on a flat surface, e.g. on a bedside
2. Connect the power supply cable
3. If SOMNOsmart 2 is to be operated with a volt-
L E R
T E R
4. Please insert the adapter
cabinet or on the floor next to the bed.
Keep a space of min. 5 cm between the rear of
the unit and the wall as the air inlet is on the rear
of the unit.
Do not cover the unit.
connection and a socket outlet.
29
SOMNOsmart 2 automatically detects whether
115 V or 230 V has been connected and switch-
es over automatically.
The display shows "
age of 12 or 24 V DC, connect the inverter
a cigarette lighter.
To do so either use an:
– inverter 12 V WM 24131
– inverter 24 V WM 24132
Connect the outlet of the inverter and the supply
connection of SOMNOsmart 2 using the pow-
29
er supply cable
3
the unit outlet .
7
Note:
The appliance automatically compensates for dif-
ferences in air pressure (e.g. due to high altitude).
3
" for standby.
0
.
of the hose system into
10
to the supply
to
32