Tools And Test Equipment; Technical Changes - Weinmann ACCUVAC Basic Service And Repair Instructions

10. Tools and Test Equipment

Following is a list of all tools and test equipment
mentioned in these Service and Repair Instructions.
See the relevant chapter for details of the tools and
test equipment needed in each case.
• Cross-head screwdriver, size 1
• Cross-head screwdriver, size 2
• Tubular wrench, 10 mm – for knob
• Open-end wrench, 7 mm – for tube connection to pressure gage
• Ball-joint socket wrench 2.5 mm – for regulator valve
• Wire cutters – for cable tie on pressure gage
• Pliers
• Vacuum test pressure gage set

11. Technical Changes

Technical change
Case reinforced, use of washers discontinued
Stronger release catch
Vacuum pump without side walls
Appliance plate with
e 1
Redesigned circuit board
26
Tools and Test Equipment
WM 15294
mark
Special tools can be obtained from the manu-
facturer, WEINMANN.
From Device No.
5372
5932
9412
10735
22502
Date
20.11.01
22.02.02
28.10.02
28.06.04
05.03.09