Restore Configuration - Pilz PSEN sc M 3.0 08-12 Operating Manual

Operation
Menu item
Configuration
Setting
Menu item
Display settings
Reset
PSENscan
Exit
Exit menu in the display.
10.5

Restore configuration

Prerequisites
} The memory module is installed correctly.
}
The pin assignment must be compatible with the data in the memory module.
}
The correct configuration for the application is ready on the memory module.
One of the following conditions must be met.
}
The MIB files in PSEN sc M 3.0/5.5 08-12 series and in the memory module are different.
}
The topologies in PSEN sc M 3.0/5.5 08-12 seriesand in the memory module are differ-
ent.
}
The serial numbers saved in PSEN sc M 3.0/5.5 08-12 series and in the memory module
are different.
Procedure:
1. Switch the safety laser scanner on.
Operating Manual PSEN sc M 3.0/5.5 08-12
1005055-EN-03
Menu second Meaning
level
Firmware version The firmware version of PSEN sc M 3.0/5.5 08-12
series is displayed.
Device Lifetime (h) The current operating time of PSEN sc M 3.0/5.5
08-12 series in hours is displayed
Configuration-specific displays
Configuration name The name is displayed under which the configura-
tion was saved in PSENscan Configurator.
Check sum The check sum is displayed that was created when
saving the configuration.
Last saved date Date of last modification of the project
IP address The first IP address of the PSEN sc M 3.0/5.5
08-12 series is displayed.
MAC address The MAC address of the PSEN sc M 3.0/5.5 08-12
series is displayed.
Menu second Meaning
level
Rotate The display is rotated.
Confirming starts a reset of the PSEN sc M 3.0/5.5
08-12 series.
| 94