Manage Password; Reset Password - Pilz PSEN sc M 3.0 08-12 Operating Manual

PSENscan Configurator
Procedure:
} Select Project -> Save.
The dialogue box for saving is opened. Please enter a name for the MIB file.
The MIB file includes all the data for configuration.
8.5

Manage password

Prerequisites
}
There is a connection to the safety laser scanner.
Procedure:
1. In PSENscan Configurator, select Device -> Settings -> Change access rights.
Enter the current password and click "OK".
2. Enter the new password twice and select the access rights for the password.
Enter the new password in the field New password. Repeat the password in the field
Check new password. Select the access rights for the password and confirm with OK.
8.6

Reset password

Prerequisites
}
There is a connection to the safety laser scanner.
Procedure:
1. In PSENscan Configurator, select Device-> Settings -> Reset password.
Take down the counter shown and the serial number of the safety laser scanner. Do
not close the window unless you have a new password.
2. For resetting the password, please contact Pilz.
Name the counter shown and the serial number of the safety laser scanner.
You will receive a new password.
3. Enter any text in the Reset password window and click OK.
You can access the safety laser scanner again.
Operating Manual PSEN sc M 3.0/5.5 08-12
1005055-EN-03
| 76