Area With Limited Detection Capability - Pilz PSEN sc M 3.0 08-12 Operating Manual

Project configuration
Applications of a reference outline for protecting additional protective equipment
When the reference points are set to the positions of additional protective equipment, for
example mechanical barriers, the safety laser scanner switches the OSSDs to the OFF
state when one of the marked positions changes.
Fig.: Using a reference outline for protecting additional protective equipment
Legend
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
5.5

Area with limited detection capability

In the area of max. 100 mm before the laser scanner there is an areas with limited detec-
tion capability.
Please note:
} Ensure that the area is not part of the danger zone.
}
Install the safety laser scanner so that no objects can enter the zone with limited detec-
tion capability.
Operating Manual PSEN sc M 3.0/5.5 08-12
1005055-EN-03
[4]
[4]
[5]
[4]
Danger zone
Area covered by the safety laser scanner
Safety laser scanner
Reference points at protective equipment 1
Additional protective equipment 1 that is protected by the reference points
Additional protective equipment 2 that is protected by reference points
Reference points at protective equipment 2
Reference points on the floor
[3]
[1]
[8] [8]
[2]
[7]
[7]
[6]
[7]
[8]
| 37