Psenscan Configurator; Basics; Installation; System Requirements - Pilz PSEN sc M 3.0 08-12 Operating Manual

PSENscan Configurator

8 PSENscan Configurator
8.1

Basics

The PSENscan Configurator is a graphic tool
}
For configuration of the safety laser scanners of the PSEN sc M 3.0/5.5 08-12 series,
} For incorporation of the safety laser scanner into the network,
}
For monitoring the safety laser scanners in the network,
}
For creating reports,
}
For password administration of the safety laser scanner of the PSEN sc M 3.0/5.5 08-12
series
8.2

Installation

8.2.1

System requirements

Operating system:
Processor:
RAM:
Available hard drive space:
Graphics card:
To view the documentation:
Interfaces:
Access rights:
8.2.2

Install PSENscan Configurator

Procedure:
1. Switch on your computer and start up the operating system.
2. Download the software PSENscan Configurator from the download area on the Pilz
homepage under http://www.pilz.com/support/downloads/.
3. Double-click on the unpacked file.
The software PSENscan Configurator is installed.
The installer will guide you through the installation.
Operating Manual PSEN sc M 3.0/5.5 08-12
1005055-EN-03
Windows 7, 10 or XP (32 Bit and 64 Bit)
Pentium 4, min. 2 GHz
3 GHz recommended
Min. 2 GB
Approx. 70 MB
Min. 1024 x 768 pixel resolution, 65536 col-
ours
For optimum performance of the system, a
current graphics card with 3D acceleration
should be used, and the 3D acceleration
should be activated.
Adobe Acrobat Reader, from Version 7.1.0
A free 100 Mbps Ethernet interface for data
transfer to the safety laser scanner
Network access for PSENscan Configur-
ator, profile Private
| 73