Single Connection - Pilz PSEN sc M 3.0 08-12 Operating Manual

Wiring
6.8.1

Single connection

Procedure:
1. Use a 4-pin cable (see
the safety laser scanner.
2. Connect the safety laser scanner to the supply voltage and an
device [
Use a 8-pin or 12-pin cable (see
3. Switch the safety laser scanner on.
4. Configure the safety laser scanner in PSENscan Configurator. [
Operating Manual PSEN sc M 3.0/5.5 08-12
1005055-EN-03
PSEN sc
PSENscan Configurator
Order references [
77].
Order references [
Evaluation device
114]) to connect the configuration PC to
114]).
evaluation
73]
| 61