WAGO 761-114 Manual page 67

WAGO-TO-PASS® 761
761-114 Telecontrol Module Compact, 2 AI, Web, MODBUS485
Table 29: Configuring the analog inputs
Alarm settings
First value
Message
Address
Analog value
Second value
Message
Address
Analog value
Manual
Version 1.0.0
In this field enter the first limit for which a message is to be
sent when this limit is violated (upper/lower limit) (see
below).
Use the buttons to select whether the message is to be sent for
violation of the upper [increasing] or lower limit value
[decreasing].
In this field enter the text to be contained in the message
transmitted when the analog value has violated the first
(upper/lower) limit.
Use these buttons to select the addresses to which the
message is to be transmitted when the analog value has
violated the first limit.
Click the button [Internet] for applications with GPRS
transmission.
Use these buttons to select up to four analog values which
can also be transmitted with the message when the analog
value has violated the first (upper/lower) limit.
In this field enter the second limit for which a message is to
be sent when this limit is violated (upper/lower limit) (see
below).
Use these buttons to select whether the message is to be sent
for violation of the upper [increasing] or lower limit value
[decreasing].
In this field enter the text to be contained in the message
transmitted when the analog value has violated the second
(upper/lower) limit.
Use this button to select the addresses to which the message
is to be transmitted when the analog value has violated the
second (upper/lower) limit.
Click the button [Internet] for applications with GPRS
transmission.
Use these buttons to select up to four analog values which
can also be transmitted with the message when the analog
value has violated the second (upper/lower) limit.
Parameterizing 67