Diagnostics; Test Inputs And Outputs; Figure 41: Test Inputs And Outputs - WAGO 761-114 Manual

96

Diagnostics

9 Diagnostics
9.1

Test Inputs and Outputs

To test the inputs and outputs select the menu option Controller > Test I/O.
The following window is displayed:

Figure 41: Test inputs and outputs

The process values of the inputs are displayed in the upper area and the process
values of the outputs are displayed in the lower area.
By pressing the buttons [Output 1] ... [Output 4] in the upper area switch digital
inputs on and off.
Click [OK] to end the test and close the window.
Alternatively, the inputs and outputs can also be tested with the help of the menu
option Visualization > Process values.
761-114 Telecontrol Module Compact, 2 AI, Web, MODBUS485
WAGO-TO-PASS® 761
Manual
Version 1.0.0