Inputs/Outputs; Figure 36: Visualization Of The Process Values - WAGO 761-114 Manual

WAGO-TO-PASS® 761
761-114 Telecontrol Module Compact, 2 AI, Web, MODBUS485
8.1.2.1

Inputs/Outputs

Press the [I/O] button to display the process values of the inputs and outputs. The
process values displayed are valid if the on-line display is green.

Figure 36: Visualization of the process values

Process values pertaining to inputs are displayed in the upper portion of the
window and those pertaining to digital and analog outputs are displayed in the
lower portion of the window.
Digital inputs configured as counter inputs are highlighted in blue.
Displaying the Analog Values
The process values of the analog inputs are displayed with an 8-bit resolution.
Manual
Version 1.0.0
Operation 85