Inputs/Outputs; Figure 39: Visualization Of The Process Values - WAGO 761-114 Manual

92 Operation
8.2.2.1

Inputs/Outputs

Press the [I/O] button to display the process values of the inputs and outputs. The
process values displayed are valid if the on-line display is green.

Figure 39: Visualization of the process values

Process values pertaining to inputs are displayed in the upper portion of the
window and those pertaining to digital and analog outputs are displayed in the
lower portion of the window.
Digital inputs configured as counter inputs are highlighted in blue.
Displaying the Analog Values
The process values of the analog inputs are displayed with an 8-bit resolution.
You can set or reset the digital outputs by pressing the [Set/Reset] buttons.
761-114 Telecontrol Module Compact, 2 AI, Web, MODBUS485
WAGO-TO-PASS® 761
Manual
Version 1.0.0