Writing Parameters To The Module - WAGO 761-114 Manual

80 Parameterizing
7.10

Writing Parameters to the Module

After you have adapted all parameters for the TO-PASS
your requirements, you have to write the parameters to the connected module.
Select the menu option Edit > Write Parameters. The software then writes all
parameters to the TO-PASS
After the COM LED goes out, the TO-PASS
operation.
761-114 Telecontrol Module Compact, 2 AI, Web, MODBUS485
®
telecontrol module.
®
WAGO-TO-PASS® 761
®
telecontrol module to
telecontrol module is ready for
Manual
Version 1.0.0