Testing The Modem; Figure 37: Testing The Modem - WAGO 761-113 Manual

88 Diagnostics
9.4

Testing the Modem

Direct serial link required
The modem test may only be performed with a direct serial link to the TO-PASS
telecontrol module.
To test the mode, select the menu item Modem > Test.
The following window is displayed:

Figure 37: Testing the modem

A link to the modem is established and the signal strength displayed.
Click [OK] to end the test and close the window.
761-113 Telecontrol Module Compact, 2 AI, Web
WAGO-TO-PASS® 761
®
Manual
Version 2.0.0