Commissioning The Exit Button, Skylight Button, Atmosphere Light, Emergency Button, And Magnetic Lock - Huawei SmartDC V100R021C10 User Manual

ECC800 Data Center Controller
User Manual
Device
Fingerprint
lock
----End
6.4.3 Commissioning the Exit Button, Skylight Button,
Atmosphere Light, Emergency Button, and Magnetic Lock
Procedure
Step 1 Check functions of the exit button.
Table 6-13 Function commissioning
Check Method
Attempt to open the door by pressing
the exit button when the aisle door is
closed.
Step 2 Check functions of the skylight button.
Issue 04 (2021-10-09)
Check Method
Method 1: Ensure that the
cabinet door is closed, and
attempt to open the door with
an IC card or authorized
fingerprint.
Method 2: On the WebUI,
choose Monitoring > Cabinet
> IT Cabinet n > Fingerprint
Lock n, and click Controls to
open the door remotely.
Method 3: On the WebUI,
choose Monitoring > Cabinet
n > Fingerprint
> IT Cabinet
Lock n, click Running
Parameters, and set Door
open timeout.
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
Normal Connection Status
Method 1: Place an IC card or
authorized fingerprint over the
fingerprint lock. When the
indicator of the fingerprint
lock blinks blue, press the
lower part of the fingerprint
lock to open it.
Method 2: When the indicator
of the fingerprint lock blinks
blue after remote unlocking,
press the lower part of the
fingerprint lock to unlock it.
Choose Query > Access Event
on the WebUI. You can view
the type of this access control
event.
Method 3: If the time after the
fingerprint lock is opened
exceeds the value of Door
open timeout, a Door open
time-out alarm is generated.
Normal Connection Status
The aisle door is opened successfully.
143