Huawei SmartDC V100R021C10 User Manual page 207

ECC800 Data Center Controller
User Manual
2.
3.
4.
5.
6.
Issue 04 (2021-10-09)
NO TE
The OMU Portal supports Internet Explorer 8.0 and later versions.
On the login page, enter the user name admin and preset password
Change_Me, and click Log In to enter the OMU Portal page. A message is
displayed upon the first login indicating that you should modify the password.
After modifying the password, keep it properly.
NO TE
– If the VCN software version is V100R003 or later, the default user name is admin.
– If the VCN software version is V100R002 or earlier, the default user name is
Admin.
– The following uses V100R003 as an example.
Choose Local Configuration > Server configuration. Set the service IP
address (internal IP address of the VCN), time zone, and time according to
the site requirements.
Figure 6-56 Configuring the server
NO TE
Set Business IP to XXX.XXX.XXX.XXX, Subnet mask to 255.255.255.0, and Gateway IP
to XXX.XXX.XXX.XXX. The values here are examples. The actual value prevails.
(Optional) Configure the NTP synchronization. After setting The NTP clock
source server to Yes, set the IP address of the NTP server.
NO TE
Currently, the VCN and NTP source server must be in the same LAN for NTP
synchronization. For details, see
If the VCN and the NTP source server are not in the same LAN, you need to manually
set the time as follows: Choose Local Configuration > Server configuration and
change Timezone config and Time config based on the time of the source server to
be synchronized.
Choose Maintenance > Unified Configuration, set Module name to MU,
and click Search.
In the search result, click Edit in the row where the value of Parameter Name
is NatIP and set Value to the external IP address of the VCN. Click Save.
Copyright © Huawei Technologies Co., Ltd.
Step 2.
6 Feature Description
195