Huawei SmartDC V100R021C10 User Manual page 129

ECC800 Data Center Controller
User Manual
----End
Follow-up Procedure
To modify the parameters of a single eLight, do as follows:
1.
2.
Issue 04 (2021-10-09)
Figure 5-9 eLight actuator position
Table 5-9 Access authorization
Access authorization
Access authorization fails and the
aisle door cannot be opened.
Access authorization succeeds and
the door can be opened.
NO TE
– The eLight actuator is automatically associated with the nearest access actuator in the
smart module view.
– If there are one access actuator and two eLight actuators in an aisle, the access
actuator is automatically associated with the two eLight actuators.
Choose Monitoring > Aisle > eLight Actuator Group > eLight Actuator. The
Running Parameters page is displayed.
Select the Associated alarm severity as required and click Submit.
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
Description
Red light, blinking for 3 seconds
Green light, blinking for 3 seconds
117