Access Control System; Aisle Access Control System - Huawei SmartDC V100R021C10 User Manual

ECC800 Data Center Controller
User Manual
Indicator
ALM

3.2.4 Access Control System

The access control system applies to the equipment rooms, aisle containment, and
cabinet doors.

3.2.4.1 Aisle Access Control System

The access control system collects and monitors data about the access of devices
and personnel to ensure access security.
Diverse access control devices such as the fingerprint and card reader with a
keypad, fingerprint and card reader, and card reader with a keypad are supported.
Note that the communication distance between an access control device and an
access actuator should be less than or equal to 5 meters.
Table 3-27 IC card chip specifications
Item
Chip model
Chip name
Chip type
Operating frequency
Read/write distance
Storage capacity
Issue 04 (2021-10-09)
Color
Red
NO TE
If the IC cards used by the access control device need to be purchased, the IC card chip
specifications are as follows.
Copyright © Huawei Technologies Co., Ltd.
Name Status
Blinking
Alarm Steady on
indicator
Off
Specifications
S50
Mifare 1K (S50) card
Philips Mifare 1 IC S50
13.56 MHz
1–3 cm
8 kbit, 16 partitions
3 Device Description
Description
The indicator blinks at
super short intervals for
0.5s (blinking at 10 Hz, on
for 0.05s and then off for
0.05s) and then turns off
for 0.5s. The cycle lasts for
5s.
The PoE output current is
overloaded.
The PoE output is normal
or not connected.
33