Huawei SmartDC V100R021C10 User Manual page 276

ECC800 Data Center Controller
User Manual
4G Networking
4G communication can be used to access the NetEco management system that
has a public IP address.
Step 1 Loosen the screws on both sides of the panel of the ECC800-Pro main control
module.
Step 2 Pull the handles on both sides of the panel of the ECC800-Pro main control
module, and remove the module.
Figure 6-106 Removing the ECC800-Pro main control module
Step 3 Install the SIM card.
Figure 6-107 Installing a SIM card
Step 4 Insert the ECC800-Pro main control module into the slot.
Step 5 Tighten the screws on both sides of the panel of the ECC800-Pro main control
module.
Step 6 Install a 4G antenna.
Issue 04 (2021-10-09)
NO TE
The monthly traffic of the SIM card is not less than the total traffic of all networked
devices. It is recommended that the monthly traffic of the SIM card be greater than or
equal to the total number of networked devices multiplied by 20 MB.
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
264