Huawei SmartDC V100R021C10 User Manual page 291

ECC800 Data Center Controller
User Manual
Step 5 Choose Monitoring > System > Robot IPC > Running Information to view the
running information about the robot IPC. Choose Running Parameters and
Controls to verify functions.
Figure 6-117 Robot IPC
Tab
Runni
ng
Infor
matio
n
Runni
ng
Para
meter
s
Contr
ols
Issue 04 (2021-10-09)
Parameter Description
- Views the running information about the robot IPC.
Device name Specifies the display name of the IPC.
Move speed Specifies the movement speed of the IPC.
Alm battery If the battery level is lower than the value of this
threshold parameter, the robot reports an alarm.
Charge If the battery level is lower than the value of this
battery parameter when an automatic inspection task is being
threshold executed, the robot automatically returns to the
charging pile for charging.
Robot moving If the robot does not reach the target point for
timeout inspection within the time specified by this parameter,
threshold the task times out and the next inspection task starts.
PTZ max If the PTZ height is set, the robot performs limit
height control. This parameter specifies the maximum height
of the PTZ.
PTZ camera Specifies the camera focus mode: automatic or manual.
focus mode
Rotate angle Specifies the body angle.
Auto return Controls the robot to return to the charging pile for
charging.
Robot IPC Robots the robot IPC.
reboot
Robot IPC Clears robot IPC alarms.
alarm clear
Fill light Turns on or off the illuminator on the PTZ camera.
control
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
279