Huawei SmartDC V100R021C10 User Manual page 164

ECC800 Data Center Controller
User Manual
Figure 6-15 IP camera ONVIF interface access password
Step 4 Click Confirm after video information is entered.
Step 5 In the Video Information list, click the link under the Link column and go to the
camera WebUI as prompted.
Step 6 For details about how to commission IP cameras and set parameters for them, see
the documentation delivered with the equipment or obtain the documentation by
referring to the "Preparing Documentation" section.
1.
2.
3.
Issue 04 (2021-10-09)
Preview the site situation in real time and check the camera coverage through
videos. Adjust the lens if necessary.
(Optional) If the VCN or IVS1800 is not configured, configure an SD card. For
details, see 6.5.3.2 Commissioning an IPC6325 Camera (SD Card
Configured).
Choose Settings > Video/Audio/Image > Video, and set camera stream
type, primary stream, and secondary stream 1 parameters, as shown in the
following figures.
NO TICE
Set the encoding protocol to H.265.
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
152