Huawei SmartDC V100R021C10 User Manual page 192

ECC800 Data Center Controller
User Manual
3.
Issue 04 (2021-10-09)
Table 6-29 IP address parameters
Parameter
IPv4 address
assignment
IPv4 address
IPv4 gateway
IPv4 subnet
mask
Primary DNS
Secondary DNS
On the View tab page, click the General tab to access the General tab page.
Select Video and set the parameters, as shown in the following figures.
Copyright © Huawei Technologies Co., Ltd.
Description
Method for obtaining the IP address. The options are
Obtain IP address automatically and Use the
following IP address. The default value is Obtain IP
address automatically.
Camera IP address. This parameter is available only
when IPv4 address assignment is set to Use the
following IP address.
Enter the planned IP address, for example,
192.168.1.161. IP addresses starting with 127 are
invalid. You must enter an IP address starting with a
value that ranges from 1 to 223.
Gateway IP address of the network where the camera is
located. The default value is 192.168.0.1.
Subnet mask of the network where the camera is
located. The default value is 255.255.255.0.
Primary DNS IP address. The default value is 0.0.0.0.
Secondary DNS IP address. The default value is 0.0.0.0.
6 Feature Description
180