Huawei SmartDC V100R021C10 User Manual page 35

ECC800 Data Center Controller
User Manual
Indicators
Table 3-14 Indicators on the ECC800-Pro main control module
Indica
tor
RUN
ALM
RF_Z
SW Button
Table 3-15 SW button description
Function
Description
Wireless
network RF_Z
(802.15.4)
pairing
Issue 04 (2021-10-09)
Color Item
Green Running status
indicator
Red Alarm indicator
Green Communication
status indicator
Operation Description
In non-wireless network (802.15.4)
pairing mode, press and hold down
the button for 3s to 5s to enter the
wireless network pairing mode.
Copyright © Huawei Technologies Co., Ltd.
Status Description
Steady on The power supply is normal,
the program is being loaded.
Off The power supply is
abnormal.
Blinking at The software runs properly
long (the indicator blinks at 0.5
intervals Hz, on for 1s and then off
for 1s) or the ECC800-Pro
registers with the NetEco
successfully.
Blinking at The ECC800-Pro does not
short register with the NetEco
intervals (the indicator blinks at 5 Hz,
on for 0.125s and then off
for 0.125s).
Steady on A system failure alarm is
generated.
Off The system is normal.
Blinking at A network is set up, and no
long node access is allowed (the
intervals indicator blinks at 0.5 Hz, on
for 1s and then off for 1s).
Blinking at A network is set up, and
super node access is allowed (the
short indicator blinks at 10 Hz, on
intervals for 0.05s and then off for
0.05s).
Indicator Status
The RF_Z indicator is
blinking at super
short intervals.
3 Device Description
23