Config Menus; Config Menu Parameters - AJA Ki Pro Ultra 12G Installation And Operation Manual

File based recorder/player
Hide thumbs Also See for Ki Pro Ultra 12G:
Table of Contents

Advertisement

Disabled (default)
Enabled
On playback, Ki Pro Ultra 12G will process the QuickTime container file, process
the CLCP track if present and insert/embed closed captioning data on the main
SDI outputs (BNC or Fiber) VANC. No user configuration is required for caption
playback.
NOTE: Closed captioning is not supported on HDMI inputs/outputs or the SDI monitor

Config Menus

As in the Media menus already presented, pressing the User Control Knob and
scrolling changes the current Config parameter's value to a new one from the
Ki Pro Ultra 12G list of choices—repeating the list if you continue to scroll—or
adjusting a numerical value up or down.
The exact choices displayed will vary depending on the parameter. Most
adjustment choices made with the Control Knob take effect immediately and
will be subsequently stored into the Ki Pro Ultra 12G non-volatile memory if they
remain unchanged for 3 seconds.
The Config menu is for system set-up and configuration. Each parameter is
numbered, in the same manner as the Media menus.

Config Menu Parameters

Many of the Config menu parameters are used together to configure the type of
Ki Pro Ultra 12G recording and associated conversion formats used on the input or
output for a particular workflow.
1. 1 Record Type
This parameter defines the frame recording method. Record Type can be
configured to record the incoming video signal in a "NORMAL" manner (a
standard format) or "PsF" progressive format.
NORMAL (default)
PsF
NOTE: A 23.98Hz source is automatically treated as PsF, regardless of this setting. For
• 1080PsF 23.98 incoming video > Normal selected > 1080p 23.98 recorded to
disk.
• 1080i 25 incoming video > PsF selected > 1080p 25 recorded to disk.
• 1080i 29.97 incoming video > PsF selected > 1080p 29.97 recorded to disk.
• 1080PsF signal is recorded to disk as progressive; progressive material on disk
may be played back as PsF or progressive on the video outputs; this selection
can be made in parameter 1.3 Progressive Playback.
Ki Pro Ultra 12G File Based Recorder/Player v1.0
No caption track will be created nor will any arriving captions be
Writes any captioning data that arrives during the recording into
output.
Record standard format as input
Record progressive segmented frame
29.97 Hz or 25 Hz, "NORMAL" means encode as interlaced and "PsF" means
encode as progressive. This only applies to 1080 formats. The following details
clarify each case:
written to the clip.
a QuickTime track (CLCP).
44
www.aja.com

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents