Table of Contents
Advertisement
To protect from inadvertent actions, several operations (for example, Format
Media) may result in a "CONFIRM ACTION" display. This ensures that accidental
button presses don't cause problems. When you answer OK to a prompt, the
display then changes to an "in progress display", and automatically returns to the
menu when the operation is complete.
Figure 11. Confirm Action Dialog
Certain parameters are stored in non-volatile memory so that the parameter is
remembered between power cycles, for example: system name and date/time.
Automatic 12G Signal Detection and Configuration
When set for a Single Encode Channel (Single Channel Mode) and the
Ki Pro Ultra 12G is receiving a 12G signal on the SDI 1 or Fiber 1 input, the unit
automatically configures itself to record and playback 6G and 12G signals.
Recording a Clip
There is more than one way to record a clip since you can control Ki Pro Ultra 12G
in various ways. Here is an example of just how simple a recording can be:
1. Press the STATUS button. You'll see the currently selected input and input
format and the chosen recording format and audio input.
2. If these settings are acceptable, then push the red RECORD button below
the display.
3. The green LED slot indicator (and the green LED on the Pak Media) will
begin blinking indicating a recording is in progress. You will also see the
timecode changing on the UI display.
4. When you've finished recording, press the STOP button.
You can, of course, customize your configuration via the Config and Media menu
parameters.
To change the Encoder Type (Apple ProRes, DNxHD) prior to recording, Press
MEDIA, and then using the Control Knob, scroll until you see 14.1 Encode Type.
Then press the knob to enter the menu. Scroll to the desired setting and press the
knob again to select it, and press MEDIA or STOP to exit the menu.
IMPORTANT: To insure successful recording with the Ki Pro Ultra 12G it is good practice to
To select a different video input, press CONFIG, then scroll with the User Control
Knob to 2.1 Video Input—then press the knob and scroll to a desired video input
connector and press the knob to select. To select a different audio input, use the
knob to access 2.2 Audio Input. Repeat the selection procedure to chose a desired
audio input connector.
Ki Pro Ultra 12G File Based Recorder/Player v1.0
use new, high-quality media that has been freshly formatted in the device. For
best results, use qualified, AJA Pak Media only.
29
www.aja.com
Hide quick links:
Advertisement
Table of Contents
