AJA Ki Pro Ultra 12G Installation And Operation Manual page 46

1.4 In Convert
(Single Channel Mode only.) This parameter sets input conversion to one of the
available selections.
None (default)
4K Crop to UltraHD
4K/UltraHD to 2K/1080
Note that the 4K Crop to UltraHD selection and the 4K /UltraHD to 2K/1080
selections have no impact if 2K or 1080 video is input. By default, the
Ki Pro Ultra 12G will output 2K on the SDI monitor and HDMI monitor outputs
if the incoming signal is 4K (4096x2160) or 2K (2048x1080) and no "In Convert"
is applied. Also by default, if the incoming signal is UltraHD (3840x2160) or HD
1920x1080P, the Ki Pro Ultra 12G outputs 1080 HD on the SDI and HDMI Monitor
outputs.
Also, if the 4K Crop to UltraHD "In Convert" selection is used, the Ki Pro Ultra 12G
will output 1080 HD on the SDI and HDMI Monitor outputs.
1.5 Out Convert
This parameter sets output conversion to one of the available selections.
None (default)
2K Crop to 1080
4K Crop to UltraHD
NOTE: The 4K Crop to UltraHD selection has no impact if a 2K or 1080 video source is
The SDI Monitor output always decimates the frame size when the input source
is either UltraHD or 4K. Additionally, the user may select the Monitor Output's
Out Convert option, which will mirror the selection made in the Out Convert
menu, 1.5. In other words, if the input format is 2K, the user can choose "2K Crop
to 1080" option in menu 1.5 and the "Out Convert" option in menu 1.8 to yield a
1080 output for downstream monitors that cannot accept a 2K signal.
1.6 SDI Out
(Single Channel Mode only.) This parameter sets the SDI output format. These are
the options:
SDI 1 RGB
SDI 1 YCbCr (default)
SDI 1-2 RGB
SDI 1-2 YCbCr
SDI 1-4 RGB
SDI 1-4 YCbCr
NOTE: If the output format is UltraHD or 4K and SDI 1 RGB or YCbCr is selected, the
NOTE: SDI 1 RGB and SDI 1 YCbCr high frame rates (in excess of 29.97fps) are supported
Ki Pro Ultra 12G File Based Recorder/Player v1.0
The input is not converted
Converts and crops 4K input to UltraHD
Converts 4K input to 2K or UltraHD input to HD
The output is not converted
Converts and crops 2K output to 1080 HD
Converts and crops 4K output to UltraHD
used. Also, the 2K Crop to 1080 has no impact if a UltraHD or 1080 video source is
used.
Enables 12G signal output operation, and sets SDI 1 to RGB
Enables 12G signal output operation, and sets SDI 1 to YCbCr
Sets SDI 1-2 outputs to RGB (supports up to 2K 29.97fps)
Sets SDI 1-2 outputs to YCbCr (supports up to 2K 59.94fps)
Sets SDI 1-4 outputs to RGB (supports up to 4K 29.97fps)
Sets SDI 1-4 outputs to YCbCr (supports up to 4K 59.94fps)
output will be configured for 6G or 12G depending on video format. In this case,
SDI and Fiber Outputs 2-4 will be disabled.
by 3G-SDI. Be sure to connect the AJA Ki Pro Ultra 12G to a 3G-SDI capable device
in these cases. If a 3G-SDI capable device is not available, RGB and high frame
rate YCbCr may be output via SDI 1 and SDI 2 as "dual link" 1.485Gbps."
46 www.aja.com